Ken Davison Win7 Ultimate 64bit 44 posts Carmarthenshire. These will be a computer, firewire cable and another camcorder, funnily enough all the same parts we are having trouble with!!!!! Removing the software and usb drivers that came with the camcorder helps, if you have installed them, as sometimes these interfere with the correct operation of the firewire ones. This resulted in perfect capture. I had delete the configuration and then make a new, but nothing help. In the end, after trying everything everyone threw at him, he took a step back and thought what else could it be, check the items. Take hold of the card, carefully but firmly and pull it out as best you can in an all in one motion straight up, try not to lever it out by rocking from side to side.

Uploader: Shaktijind
Date Added: 13 October 2008
File Size: 66.62 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 50106
Price: Free* [*Free Regsitration Required]

This has the effect of stopping capture.

Once in place you can reconnect any cables and screw in the retaining screw holding the card to the case. See here for a video of how to get there. We also provide an extensive Windows ohco tutorial section that covers a wide range of tips and tricks.

Cannot connect or capture

All times are GMT Neither of these entries should have a yellow exclamation mark by them, like you can see in the picture where there is one next to network adaptors, if there is, you have a problem. If you are struggling with everything else and you use one of these combined cards, it may be worth trying a pci firewire card. My cannon mini dv camcorder mvx i is not detected by windows vista bit home premium, in my Laptop through IEEE port I have tried Microsoft’s solution without much luck: To fix this you can do a number of things, we’ll start with the easiest and move on to the harder as we progress.


Proffitt Forum moderator April 13, 2: Windows 7 Ultimate SP1 Bit.

If it used to work and has stopped working think about what you have done to the computer. I know this was a constant problem when renting the Panasonic AJ deck, the menu settings had to be set up a certain way.

Windows Vista does not detect miniDV Camcorder through IEEE.

ohxi Flaming or offending other users Illegal activities: Running scandisc can put right hdd errors which then allow the cam to work. There comes the message “No input signal present”.

Fri, Feb 19 3: I just wish all problems were that easy to solve: I am not sure if this will help or not but it is worth a try. If you need to do this, then follow the above instructions and remove the cards drivers from Windows before physically removing the card from the pc and then reinstalling when you have refitted the card. Test the camera on another PC. The new camcorder was returned to the shop from which it was bought, they changed it for another nvc, and as soon as he got home, he plugged it into the pc and it worked.


capture via Host – Avid Community

It was very frustrating ohcj say the least, most or the time I was able to solve the problem by changing the menu configuration on the deck. But it not works. Ken Davison Win7 Ultimate 64bit 44 posts Carmarthenshire. I have check the Deck configuration. I had to do a vhs for a customer and it wouldn’t turn on That’s why you are here isn’t it.

Conflicts can exist between pci cards due to the way the port has been assigned. Mains or battery power when capturing?

Proffitt Forum moderator April 14, 4: If the sound card works in pci slot ohhci, but then doesn’t work in pci slot 2, which the firewire didn’t work in, but the firewire card works in slot 1, then there is a good chance the motherboard is faulty. Back to Windows Vista forum 9 total posts.

Something that is appearing is Win7 is sometimes not picking the right firewire driver for the cam, so try this.