Bursting feature is a technique that DRAM itself predicts the address of the next memory location to be accessed after the first address is accessed. When you click the red triangles in the left and right sides, two sub- menus will open for users to overclock, overspec or to adjust the thresholds of system to send out the warning messages. We suggest user to make sure that your CPU can afford to overclocking regularly first. Gold arrow Please note that any violation O of the correct installation pro- cedures may cause permanent damages to your mainboard. Overclocking This mainboard is designed to support overclocking. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control.
|Date Added:||26 October 2011|
|File Size:||7.98 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
It introduces a 66MHz, bit channel for the graphics controller to directly access main memory. Resume On PME This field specifies whether the system will be awakened from power saving modes when activity or input signal of ms6728 specified hardware peripheral or component is detected.
Please refer to P. Avoid clearing the CMOS while the system is on; it will damage the mainboard. It’s also possible that the intellectual overclocking utilities such as MSI Fuzzy Logic control parameters exactly via this chip.
MSI 865PE Neo2-FIS2R – motherboard – ATX – Socket 478 – i865PE Series
This would prevent unauthorized use of your computer. This special feature is very useful for overclocking users.
A-1 Installing the Audio Driver You may need to run the Setup program when: To use the feature, you need to define the burst length, which is the actual length of burst plus the starting address and allows internal address counter to properly generate the next memory location.
When you select Load High Performance Defaults, a message as below appears: It is designed to detect the load balance of CPU while running programs, and to adjust the best CPU ethernett automatically. Colonel 4th level of overclocking.
This item allows you to set the type of floppy drives installed. Sandy Bridge Trying out the new method.
MSI PE Neo2-FIS2R – motherboard – ATX – Socket – iPE Overview – CNET
We take every care in erhernet preparation of this document, but no guarantee is given as to the correctness of its contents. Hence, the program screens shown here in this appendix may be slightly different from the latest software utility and shall be held for reference only. Danger of explosion if battery is incorrectly replaced. The board incorporates a special chip that realizes the CoreCell technology.
Position the heatsink onto the reten- mechanism on the mainboard.
MSI 865PE Neo2-PFS, Socket 478, Intel (MS-6728-110) Motherboard
Can only enter but do not ms-6782 the right to change the settings of the setup menu. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. Change these settings only if you are familiar with the chipset.
Always consult the vendors for proper CPU cooling fan.
MSI PE Neo2-FIS2R (MS v.1) iPE Based Mainboard
Otherwise, the system may become unstable or even crash. To clear the warning, you must enter the BIOS utility and clear the record. Lay this equipment on a reliable flat surface before setting it up.
Industrial network management suite for installation, operation, maintenance, and diagnostics. However, the same type and density memory modules are necessary while using dual-channel DDR, or instability may happen. BioShock Infinite and Metro: However, if any program writes to this memory area, a system error may result.
If the chassis is opened, the switch will be short. The setting of the field etyernet automatically return to Enabled later.